|
Written by Abbey Industrial Doors
|
 Abbey Industrial Doors
We pride ourselves in quality control and specialise in the repair and maintenance of all types of commercial and industrial doors throughout Yorkshire and the north of England. We also supply and install roller garage doors for private households in and around the York and Selby areas.Please select from the ‘Door Designs’ menu item to the left to view information on a selection of the designs we can offer. Specification information is available for architects or specifies, where appropriate. Please feel free to contact us for further information on any commercial, industrial or domestic door needs, we’re always pleased to help. |
|
|
Written by Abbey Industrial Doors
|
|
 Garage roller doors
Standard stock colour shutters are supplied with colour coordinated guides, end plates and box as standard. Non-stock colours (to include foil range) are supplied with white or brown guides, end plates and box as standard, alternative colours are available at an additional cost.
The 77mm roller shutter system is available with a 250mm box achieving a maximum overall height of 2.250m (including box). End plates and box are supplied in white or brown as standard, alternative colours are available at an additional cost.
Standard Specification
Tubular motor with manual override*
Remote control kit c/w 2 transmitters, courtesy light and push button*
Retro-reflective photocell*
Safety brake
Auto locks
Full canopy
90-deg UVJ (externally mounted to the 45-deg section of the canopy)
Crank Handle
Pre-drilled guides
*Items supplied pre-wired complete with mains cable and plug as standard.Lath 77mm x 20mm foam filled aluminium
Bottom Rail 78mm x 19mm aluminium (heavy duty)
Guide Section 95mm x 34mm aluminium (heavy duty)
End Plate 300mm/250mm aluminium with 45° section to back (heavy duty)
Canopy 300mm/250mm aluminium with 45° section to back
 Garage roller doors
Standard stock colour shutters are supplied with colour coordinated guides,
end plates and box as standard. Non-stock colours are supplied with white or brown guides, end plates and box as standard, alternative colours are available at an additional cost.
Standard Specification
Tubular motor with manual override*
Remote control kit c/w 2 transmitters, courtesy light and push button*
Retro-reflective photocell*
Safety brake
Auto locks
Full canopy
90-deg UVJ (externally mounted to the 45-deg section of the canopy)
Crank Handle
Pre-drilled guides
*Items supplied pre-wired complete with mains cable and plug as standard.Lath 55mm x 14mm foam filled aluminium
Bottom Rail 55mm x 14mm aluminium (heavy duty)
Guide Section 66mm x 27mm aluminium (heavy duty)
End Plate 205mm aluminium with 45° section to back (heavy duty)
Canopy 205mm aluminium with 45° section to back
|
|
|
Home 